Rocketfish RF-SBM101 - User Manual Bedienungsanleitung

RF-SBM101Soundbar MountSafety information and specifiWhat you need4Package contents: parts4Package contents: hardware5Installation instructions7User G

10STEP 2 - Preparing your TV (go to Step 3 if your TV is not already mounted on the wall).CAUTION: Refer to your TV wall mount assembly instructions f

11You’ll need23CAUTION: Heavy. You may need assistance with this step.Phillips screwdriverRF-SBM101_13-0263_MAN_V1_ENG.fm Page 11 Monday, May 6, 201

12STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back1 Carefully place your TV screen face-down on a cushioned, clea

13• Obstructed back: A bracket blocks any of the jacks on the back of your TV. You will need spacers when assembling the wall mount.• Irregularly-shap

14STEP 4 - Select screws, washers, and spacers1 Select the hardware necessary for your TV (screws, washers, and spacers). A limited number of TVs come

152 Remove the screws.3 For a flat back TV, go to “STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back” on page 16.-OR-For an i

16STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back1 Place the mount spacers (F) over the top two screw holes on the back of

176 Tighten all screws, but do not over-tighten.You’ll needFBGGGIJ K LMHHHNOTE: Your existing TV wall mount may vary from the one shown below. Refer t

18STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs1 Place the spacers (N) and mount spacers (F) over the t

196 Tighten all screws, but do not over-tighten.You’ll needFBGPQRSNTGGHHHorNOTE: Your existing TV wall mount may vary from the one shown below. Refer

2Safety information and specificationsIMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONSCAUTION: Do not use this product for any purpose not expl

20STEP 6: Options 1 and 2 - Attach the soundbar assembly to your TVCAUTION: The ends of the TV/bracket arms (A) must not extend beyond the edge of the

21STEP 6: Option 3 - Attach the soundbar hanger assembly to your TV• Attach the soundbar bracket arm (A) and hanger assembly to the TV bracket arm (B)

22STEP 7 - Final adjustments, tightening, and hanging the TV1 Adjust the soundbar bracket arm (A) assembly and the TV bracket arm (B) until the soundb

23NOTE: The TV/bracket arms should be positioned as vertically as possible.2 When the soundbar is in the correct position, tighten all fasteners.RF-SB

243 Hang the TV/soundbar assembly on the wall, following the instructions that came with your existing TV wall mount, then reconnect the cables and po

V1 ENGLISH 13-0263www.rocketfishproducts.com (800) 620-2790Distributed by Best Buy Purchasing, LLC7601 Penn Avenue South, Richfield, MN 55423

3Before You BeginPlease check the following items:• Your TV and any accessories you plan to use do not exceed the specified weight limit of your TV mo

4What you needYou will need the following to assemble your new sound bar mount:Package contents: partsMake sure that you have all the parts necessary

5Package contents: hardwareMake sure that you have all the hardware necessary to assemble your new soundbar mount. Not all hardware included will be u

6Hardware bag (continued)Label Hardware QtyN4P4Q4SpacersM4 × 40 mm screwM5 × 40 mm screwLabel Hardware QtyR4S4T4M6 × 40 mm screwM6 × 50 mm screwM8 × 4

7Installation instructionsSTEP 1: Option 1 - Mount the bracket arms to the soundbar1 Check the compatibility of the soundbar bracket with your soundba

84 [OPTIONAL] If there are gaps or recesses under the soundbar arms, slip a “Fender” washer (C) onto the keyhole screws (D) and under the soundbar arm

9STEP 1: Option 2 - Mount the bracket arms to a hangerSome soundbars come with a manufacturer supplied hanger (for example Samsung).1 Attach the sound