Rocketfish RF-TVMP20 - User Manual Bedienungsanleitung PDF herunterladen (Seite 12)

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMP20 TV Wall Mount

STEP 5 - Option 2: Installing on a solid concrete wall

1 Align the wall plate (A) at the height you determined in the previous step and make sure that it is level. Use a

pencil to mark the lag bolt hole locations (2). Remove the wall plate.

2 Drill pilot holes to a depth of 2-3/4 in. (7 mm) using a 3/8 in. (10 mm) diameter masonry drill bit.

3 Insert the concrete wall anchors (W-B) into the pilot holes and use a hammer to make sure the anchors are

flush with the concrete surface.

4 Align the wall plate (A) with the anchors, insert the lag bolts (W-A) through the holes in the wall plate, then

tighten the lag bolts only until they are firm against the wall plate.

CAUTION: Avoid potential injuries or property damage!

DO NOT over-tighten the lag bolts (W-A).

You’ll need

W-B

W-A

2-3/4 in.

(70 mm)

Edge-to edge

stud finder

W-A (2)

Pencil

Drill

3/8" masonry

drill bit

1/2" socket

wrench

Level

W-B (2)

Hammer

A Wall

plate

RF-TVMP20_13-0707_MAN_V2_ENG.fm Page 12 Wednesday, July 10, 2013 6:23 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Rocketfish RF-TVMP20 - User Manual Bedienungsanleitung Seite 12